17 REASONS TO NOT IGNORE REPAIRS TO UPVC WINDOWS

17 Reasons To Not Ignore Repairs To Upvc Windows

17 Reasons To Not Ignore Repairs To Upvc Windows

Blog Article

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They don't get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the old frame very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will keep water and drafts from entering your property until a professional comes out to repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and test it for fit. If you're happy with the fit, tighten the screws until they remain in the right place.

If you aren't able to move the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have been removed over time, but it can be due to the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and perform a test fitting. The corner joints of the sash need to align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is crucial to act if you wake up every morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass it is website more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the click here glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it blows open with a breeze. These are easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It is essentially a very simple process, but it's easier to do with someone else to help hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should open.

The problem can be caused by opening the window incorrectly or by a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to give advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also lower the chance of windows sticking and prevent double glazed window repairs corrosion. It is recommended to do this once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different things. First, the hinges due to wear and tear may become displaced, which causes an opening to appear where the sash meets the frame. If they are damaged beyond repair, it could be required to realign them. The interlock may be unbalanced. This is located on the hinge side and could require to be cleaned. In certain instances it is possible to replace the hinges.

The seals may wear out or become damaged over time, allowing air escape. Installing high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures, window repairs and reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be positioned on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it could be cheaper to replace them rather than repair them. So, if you're having read more issues with your upvc windows, it is best to seek professional assistance as soon as you can.

Report this page